Noodle type flusher

[harrells]

Got a couple of these flushers for sale. They work great. $40.00TYD.

 

[K.Kiser]

The work better than the cup/ muff style IMO...

 

[harrells]

Yes they do. I paid double that for the Merc cup that bungies over the nose. ended up giving it away.

 

[skewby]

would this work on my 4 hole bobs lower? or would it suck to much air?

 

[TBuck2003]

would this work on my 4 hole bobs lower? or would it suck to much air?

skewby,
Just plug one hole when using...


TBuck

 

[skewby]

might have been a dumb question i just bought my first ally over thanksgiving. didnt worry or have that problem on the pontoon or john boat..... lol what do i need to plug it with?

 

[harrells]

I have some rubber cone shaped plugs i would be glad to send you one with the flusher.

 

[K.Kiser]

Shove'em up in there till they stop with good pressure from the water hose and you very well may not have any issues... I homemade mine (inferior to factory models), and it will actually have 3lbs h2o pressure or more at idle on my sportmaster... I can get water through the engine and out of the tell-tale dump hoses with a muff style, but no measurable water pressure at idle...

 

[harrells]

I've got a couple more of thes flushers for sale if anyone is interested.

 

[D.Ally]

Ill take one ,check pm

 

[chester8420]

I'll take one too. I sent you a PM but it doens't show in my "sent items".....

You make these yourself, don't ya? Do you have an extra plug for a 4 hole low water pickup?

Thanks

 

[harrells]

Yes i do make them, and i can also provide you with a plug for the extra hole if needed.

 

[chester8420]

Payment sent. Thanks.

 

[xb03fs]

Will these work with a Titus cone? The holes he puts in are fairly large?

 

[harrells]

I'm not sure the hole size in the titus cone. but i use 5/16 in. OD. hose which does work on the JC and the merc. sportmaster gearcases. Hope this helps.

 

[D.Ally]

Got mine thanks

Dave

 

[boat doctor]

harrells. What kind of glue do you use to fix the hoses to the fitting ?
Epoxy or 5200 (3M) ?

Boat Doc

 

[harrells]

I use a loctite vinyl/plastic glue.

 

[chester8420]

Got it today. Thanks!

 

[chester8420]

I used this noodle flusher last week. Still working great! By far the best flusher I've ever seen.