Search results

I have cut down 20" to 15" mid done by marty powell wizard 1pc exhuast plate and tuner also have a drag cowl copy needs tlc with a mike nass carbon pan and front plate ill let it all go for $1300obo txt 3523176485 for pix or email oldskoolc10@gmail.com

Looking for a single high back allison bucket jus the shell have cover..

Ok I have an 83 hydrostream vking center steer has an allison bucket and a bench seat in the rear 12gl tank center rear trim pump on one side and batt on the other rewired some of the wiring boat is rigged and ready for your merc just bight the boat rigged it them the motor in my truck blew up...

Have two like brand new red allison seat covers fot the low back style buckets asking $175+ shipping email plfolks@aol.com for pix

im looking for a dash pod for a xb02 newer style or older doesn't matter also looking for the hatch latches trim piece for the dash what ever else u got for an xb02

can i run a 15" 2.4 200 on a 78' allison 16' center steer or would a 12" mid b better?? just a bad idea?? any info guys??

looking for to nice clean matching seat covers and a banch seat for an allison xb02

i have an 02' 280 15" os can, tuner, and exhust plate on a marty cut clamp bracket good shape asking $2200 or will take a 20" ridge back os mid or cut down bass mid as part trade.. i really like the looks of a cut down ridge back but would like the cut down bass mid for the sleeper stock look...

i am looking for the latches for lids, front bow light, and decals for the side...

i have a decent bp style cowl has been painted alien cowl type stickers that where cleared over has scratches and 3 cracks pan is perfect minus the ss plate as there isnt one... asking $300tyd....

round style dash pod on my xb02 it has the older boxy style on it

just got a bass racer and had core floor and stringers replaced due to them being soft after eveything was done its weighed in at 658lbs w/o rigging.. my questions are how high should my motor be w/ 10" set back?? and what speeds should i see w/ a mild 2.4 200 on a 15" mid w/ a bobs 200 case w/...

picked up an allison xtb 17' rigged it w/ a 78' merc 80p what size prop should we run on it w/ 2 heavy set people loaded for fishing?? not worried about top speed just good hole shot and carry the load...

im looking for a good big bearing 2.5 block would like a 260 but a 280 or drag would work most be a big bearing motor as i have all the stuff to put it together would like a block w/ matching front half but just a block will work also since i have a good front half.. im pretty sure it needs to...

ok guys i am looking for a good usable big bearing crank shaft 260/280/300 doesnt matter i have a decent crank out of my 260 but has a little spot on number 2 journal thats peeling and dont want to wait for a shop 2 fix it and send back that id to use as a part trade... let me know what yous...

i got an 29p srx thats in good shape id give it an 8 out of 10 just because it needs a good cleaning no dings or cracks never been welded or touched.... will get pix up asap only reason for sale is it just doesnt work well on my stv looking to get $375+shipping or trade for a cleaver, et copy...

i have a small shaft chopper w/ an ally cut done by remco props in lake city,fl i ran this prop on my xr2002 w/ a 2.4 200 turned it 7600-7700 @ 94mph.. i now have a stv and this prop has way to much left im willing to trade for a et copy, yammi copy, or even a clever same size 14.5x28p small...

ite guy i have a 90' xr2002 that i bought from ga it has had the transom replaced and a small spot on side where the nose of a stv hit it boat has been fixed but doesnt have a current reg so i cant get no paper work here in fla and i dont want to put a home made boat title on it so if you are in...

ok guys i am looking for a cable pully set up for my allison xr2002 i need all parts from head to toe even wing plates heard they arnt cheap new so im tryin to find a set up used i also have all the stuff for a quicksilver dual opposed steering i would trade or need to sale.... let me know what...

ok i have a clean 27p 3 blade through the hub quicksilver laser 2 prop it has a removable hub so it will fit fat shaft or small shaft mercs if you have a small shaft merc prop shaft i have a hub for you asking $175 tyd 352-317-6485...btw i had prop cked by local prop guy "remco props"