2000 Allison XB2002 w/2001 300 Drag Motor.

Dave Hensley

Well-Known Member
Joined
Mar 24, 2005
Messages
2,075
Points
63
Location
Maryville, Tn.
I am posting this for David Shook. David will answer any questions you might have on this boat. It is a beauty.

The boat is a Comp and I do not have the weight. The boat comes with Sea Star hydraulic steering and has the ride/guide steering out of the boat that goes with it. It has the short and tall rear deck lids, Livorsi gauges, new Intellitronix GPS speedo, new trim pump, Weldon fuel pump. The trailer has new wheels on it. The boat has ran 110 mph with very little set up work and David thinks it has 115 mph in it with 37cc heads. If anyone knows he does.

2001 Drag powerhead on 15" Mercury mid section. The motor has 1.5 hours on new rings installed by Jeff Calbaugh. It currently has 37cc heads, Diamond Marine flywheel and A63 box. The current set up for top end is a 29 RE3 Mazco, 1.87 CLE with Bob's nose cone installed to David's specification.

The boat is available turn key and in my opinion is a steal at $31,500. Somebody better hurry. This one will not last long. Call David at 828-606-4731

I will leave the post here for 2 days and then it will be cross posted to several sites.

DSCN0012.JPGDSCN0033.JPGDSCN0032.JPGDSCN0031.JPGDSCN0026.JPGDSCN0009.JPG

DSCN0008.JPG
 

Dave Hensley

Well-Known Member
Joined
Mar 24, 2005
Messages
2,075
Points
63
Location
Maryville, Tn.
I am thinning the herd but this one is A++++++++. MIght be selling the XB21 w/300XS to make room for it. Have to get rid of that tire cover though.....:)
 

David Shook

Active Member
Joined
Apr 11, 2005
Messages
349
Points
28
Thanks for all the calls but don't Want to split it up now maybe later but it ran too good on the one and only test run with just a shot in the dark on the first set up. made three runs and didn't push it 106-108-110 it' a runner.
 

David Shook

Active Member
Joined
Apr 11, 2005
Messages
349
Points
28
Heck no River rat , Just getting ready to turn 71 and the wife says I might want to slow down , that word isn't in my vocabulary !
 

RiverRat71

Active Member
Joined
Oct 2, 2016
Messages
209
Points
28
Location
Flint River, GA
Heck no River rat , Just getting ready to turn 71 and the wife says I might want to slow down , that word isn't in my vocabulary !
I hear you man. One of my best friends just turned 72 & is still flying Hydro's. When its in your blood it just is. Happy early Bday. RR
 

David Shook

Active Member
Joined
Apr 11, 2005
Messages
349
Points
28
How you doing Chad, haven't talked to you in awhile. If I break it up I'll call you
 

Rrbarrett

Member
Joined
Apr 30, 2019
Messages
14
Points
3
Location
Corpus Christi Texas
I am posting this for David Shook. David will answer any questions you might have on this boat. It is a beauty.

The boat is a Comp and I do not have the weight. The boat comes with Sea Star hydraulic steering and has the ride/guide steering out of the boat that goes with it. It has the short and tall rear deck lids, Livorsi gauges, new Intellitronix GPS speedo, new trim pump, Weldon fuel pump. The trailer has new wheels on it. The boat has ran 110 mph with very little set up work and David thinks it has 115 mph in it with 37cc heads. If anyone knows he does.

2001 Drag powerhead on 15" Mercury mid section. The motor has 1.5 hours on new rings installed by Jeff Calbaugh. It currently has 37cc heads, Diamond Marine flywheel and A63 box. The current set up for top end is a 29 RE3 Mazco, 1.87 CLE with Bob's nose cone installed to David's specification.

The boat is available turn key and in my opinion is a steal at $31,500. Somebody better hurry. This one will not last long. Call David at 828-606-4731

I will leave the post here for 2 days and then it will be cross posted to several sites.

View attachment 13552View attachment 13553View attachment 13554View attachment 13555View attachment 13556View attachment 13557

View attachment 13558
Wow
 
Top