Gauge hole fillers? (Blanks?)

[DaveW]

Hi all,

With the installation of my smartcraft gauges (well, when I can work out where the cables plug in :embarassed ), I'll have 6 small gauge holes where the old gauges will be pulled out.
I plan to put system link gauges in there eventually, but not for 6 months or so.

So, rather than leaving gauges in just to fill holes that don't work are there 'blanks' as such, preferably white, to fill the holes?

Dave

 

[John S]

You can use electrical weatherproof knockout seals, that would work. When I redid my xtb guages, I just made new plates out of stainless, then put a carbon fiber over them. Looked pretty good, and wasnt too much of a hassle, just used the existing for a template. Good luck.

 

[F2008]

https://www.onesourceboatingsupply.com/product.asp?gr=1008-3

 

[FlatOutAlly]

Do it right and find a scrap of marine plywood, cut some proper size plugs with a hole saw and resin them in. This will restore the strength and you can redrill later if needed.