NCLakeman
Active Member
- Joined
- Mar 18, 2005
- Messages
- 107
- Points
- 0
Jimmy I had my motor rebuilt. I have run 2 gallons of mercury oil thru my 260. The first 40 gallons of gas and 25% mixed oil was between 4,000 and 5,000 rpm. The last 10 gallons was between 4,000 and 6.250 rpms. The builder of the motor raised the enrichment from 96 to 103 in the CPU during breakin. Now he adjusted the enrichment back to where it was before the rebuild. Now what should I do about the oil to gas ratio? What are your recondmindations for break in. I usually use pensoil synthitic. Do I mix a few tank with the pensoil at 25% mix or go to 32%? Not sure what to do. let me know please. I wait for the gods to answer.
Thanks
Richard
Thanks
Richard