J Jimxb02 Active Member Joined Mar 21, 2005 Messages 315 Points 0 Aug 17, 2009 #1 What does the horsepower curve for the early model ( 95-97) Promax look like ? When does the power roll off --- 7400, 7500 or 7800 RPM ???? Where should the rev limiter be reset for best performance ??? Jim
What does the horsepower curve for the early model ( 95-97) Promax look like ? When does the power roll off --- 7400, 7500 or 7800 RPM ???? Where should the rev limiter be reset for best performance ??? Jim
TBuck2003 Moderator Joined Mar 31, 2005 Messages 1,391 Points 48 Location Twinsburg, Ohio Sep 11, 2009 #3 Jimbo have seen them on a dyno and they fall and fall hard after 7200.That is of course with stock port timing.6800-7100 is the wheelhouse,I always ran mine at 6900 which produced the best numbers. TBuck
Jimbo have seen them on a dyno and they fall and fall hard after 7200.That is of course with stock port timing.6800-7100 is the wheelhouse,I always ran mine at 6900 which produced the best numbers. TBuck
J Jimxb02 Active Member Joined Mar 21, 2005 Messages 315 Points 0 Sep 11, 2009 #4 A big thanks Todd !!!! Real numbers !!!! Thanks again. Jim
J jimbob88 Active Member Joined Jun 7, 2007 Messages 855 Points 18 Location northern mn Sep 11, 2009 #5 tbuck- what about a '99? when does it fall off? mine falls off at about trolling motor speed right now. lol!! jim
tbuck- what about a '99? when does it fall off? mine falls off at about trolling motor speed right now. lol!! jim
chad202 Well-Known Member Joined Mar 16, 2005 Messages 1,769 Points 48 Location Paulina, LA Sep 13, 2009 #6 Should be the same. I proped my 99 promax to spin 7100-7200 with fishing load and 6850-6900 with topend prop.
Should be the same. I proped my 99 promax to spin 7100-7200 with fishing load and 6850-6900 with topend prop.