LAAllison
Active Member
I need a prop for my GS 225SM. A guy on S&F has a 28 chopper that I want. The Merc # on the barrel is 48 89860 28. Right prop? Will it fit. I've run a 28 chopper before and liked it.
Thanks
Art
Thanks
Art
Right Prop?
- Thread starter LAAllison
- Start date
ragtopvet
Member
looks right, follow this link for chopper tutorial http://abiossa.gearhost.net/adamsdock/chopper.html
LAAllison
Active Member
Chopper
Thanks ragtop. That's a great link.
What year Vette?
Thanks ragtop. That's a great link.
What year Vette?
ragtopvet
Member
Don't have any now,sold them when i bought my farm,have 14 horses and a yellow 2002 w 260 merc :lol:
Had a 75 conv.72 t-top,and 68 big block conv.
Had a 75 conv.72 t-top,and 68 big block conv.
Skydog
Active Member
Get
A 26 Hoss Triton one and never look back! Every Chopper i ever run is just ok. The Hoss ROCKS!
Skydog
A 26 Hoss Triton one and never look back! Every Chopper i ever run is just ok. The Hoss ROCKS!
Skydog
LAAllison
Active Member
Flow Torque Hub
On this post there is a link to Adams Dock which is about Chopper props.
The info says that the Chopper II has the Flow Torque hub and can be replaced by hand. Can I buy a Chopper with the "fat shaft" hub and replace it with the small shaft hub and be good to go?
Thanks
Art
On this post there is a link to Adams Dock which is about Chopper props.
The info says that the Chopper II has the Flow Torque hub and can be replaced by hand. Can I buy a Chopper with the "fat shaft" hub and replace it with the small shaft hub and be good to go?
Thanks
Art
catfish123
Well-Known Member
- Joined
- Mar 15, 2005
- Messages
- 1,938
- Points
- 38
Art, yes you can change the hub kit on a Chopper II and make it fit on a small or large shaft. I have never run a stock Chopper II but I recently ran an Allison cut Chopper II. I like it. It does not have quite the top end of an ET on my boat but it runs well and carries a load well. I ran a 28 pitch and it acts more like a 30 pitch.