SLOmofo
Well-Known Member
I drilled and tapped the drivers seat holes... one inch apart. took some time but I can move the drivers seat an inch at a time to balance.
Side steer 2003 to center steer
- Thread starter Morespeed4me
- Start date
local103racing
Active Member
- Joined
- May 28, 2014
- Messages
- 75
- Points
- 8
I just got my slide side from bill only problem is no forward and backward adjustment maybe I got the wrong one
SLOmofo
Well-Known Member
I took out the seat slider assembly and mounted the seat directly to the floor. This was years ago so... memory? It only could move in one direction.
The front to back slide bolts on top of the side to side slide.
SLOmofo
Well-Known Member
Makes sense.
local103racing
Active Member
- Joined
- May 28, 2014
- Messages
- 75
- Points
- 8
Looks like I need to mount my existing adjustable seat mount on top of my new slide side but I’m going to need to drill and tap new holes for it to work
local103racing
Active Member
- Joined
- May 28, 2014
- Messages
- 75
- Points
- 8
Ok so I got the slide side installed with the forwards and backwards adjustable mount thanks for the info guys now onto moving steering.
Attachments
local103racing
Active Member
- Joined
- May 28, 2014
- Messages
- 75
- Points
- 8
That worked out great takes any guess work out of it
Attachments
catfish123
Well-Known Member
- Joined
- Mar 15, 2005
- Messages
- 1,938
- Points
- 38
So with this addition, you wind up sitting higher than originally?
whipper
Well-Known Member
I did this with my existing seat base just turned it side ways and turned the stuff attached under the seat it self the same. Worked GREAT love it for solo love it for passengers. Mine is not full center steer but far enough over i lost 20lbs of shot and can also go way over to the other side with a passenger and not have to move any weight around to perfectly balance. Yours has a long travel nice. Interested in hearing Catfishes question about hight? Be nice to have your steering on a slide also.