Suggested Prop for XB 2002

[Sackett]

Hey guys, been out of the Allison Boat world for to long, but great to be back.
I have an 89 model XB2002 with an 89 model 200 Mariner. Bobs Nose Cone, blow out ring, 12" Allison Jack Plate with 2" spacers making it 14". ( I believe this is way to much for the boat) Currently have a 27 RX prop on the boat. turning 5700-5900 rpm.

Only had it in the water twice in the last week, but the boat seems like it does not have the right prop.

I plan to at least remove the 2" spacers soon.

Any veterans have any recommendations experience on props, best set up, speeds.

Thanks

Sackett, Watts Bar Lake, Tn.

 

[lundy02]

My set up Xb02 stock 260 short shaft tooters 200 case even with the pad. props 26.28 pitch allison cut choppers. 28 spinelli.24 yamaha copy.22 chopper. the 26 allison stays on the boat most of the time..the yamaha and spinelli are easy to drive with when light but do not cary weight well.the 22 chopper is a drag prop.the 26 allison will run 105 that is fast enough..