aj06bolt12r
Active Member
Anyone have a 26p trophy plus they want to part with? Hoping it might be easier for me to learn to drive with than my 28p hoss cut chopper
Thank you sir that is what I have been hearing. I only have an hour or two of seat time in this XB or any performance pad v for that matter. But I can't seem to stay on pad for more than a few seconds before I loose it. Trying to maintain 70mph and master that before going any faster. Seems easier to drive while accelerating then it is maintaining steady speed.A smaller diameter 4 blade should be easier to learn with. I sold my 26 Trophy Plus earlier this year. Of my current props, a 24 Drag 4 takes the least skill to drive
Nice, so you didn't have to drill any new holes in the boat to make that happen?What I did to mount the accelerator pedal to the floor was... Cut a piece of 1/4" thick aluminum, drill and tap holes to correspond with the pedal. I slit and lift the carpet so I could epoxy the plate to the floor. Another piece of aluminum drilled and tapped is glued to the cross member in front of the pedal. It has a piece of all thread and a lock nut and acts as a WOT stop.