xb2002

[bruce pitts]

i have an xb2002 with 13 in of setback it has a 200xs on it with a 28 chopper on it right now i am 1/4 in above pad 87 mph at 6450 rpm anyone have any set up tips for this rig thanks not sure were i need to be with that much set back

 

[ssv1761982]

That sounds pretty close to me. I have 12 1/2" on mine with a 225x. I am about 3/8" above but it is so hard to get and exact measurement I don't know if you could tell the difference in 1/8th inch. It is easy to drive with a variety of props.

 

[chad202]

Is prop stock?

 

[racerx]

I would of guessed that to run in the low 90s for sure a xb2003 with stock promax with a 28 chopper will do that quarter under the pad there is something wrong and don't sound like the setup..

 

[kcrochet]

are you on the rev limiter?

 

[xb03fs]

Where a good life jacket and hit the trim button again? Have a buddy in a chase boat

 

[bruce pitts]

Thanks for the input. per ecu the limiter is set at 6800. the prop has some work done to it some cup added and thin some i do have some trim left going to the lake this weekend
i was just easing up on it drives good were i have is set at also it is a 15 in ss i will send a buddy a head of me lol