Hi Guys, So i have a 2012 XB21 Bassport and I wanted to start a thread to talk about how weight should be distributed in the XB21 boats according to some of you guys who know best. I could not find anything in the forums and thought the topic would be a good one for the owners.
My setup is a 250 ProXS w/a Sportmaster Gearcase with no transducer s on the skid plainer (sp?)
50 lb battery in left rear compartment
40 lbs of batteries in center area in front of the cooler (i use to have led acids at 112 lbs (24 volt system)
35lbs of tackle to the left of the batteries up front
20 lbs of rods in right front rod locker
48 lb XI5 troller
No propoles...
I guess the real question here is what should the weight distribution be optimally in an XB21? I would assume that there is some type of schematic that shows the "optimal weight per section setup" although I would think that each boat is a little different... Any ideas?
Is there a standard protocol that you guys use ie... if with a passenger do this... If just a driver only do this, Light load do this? Heavy do this? Tournament do this?
Thanks Guys!
My setup is a 250 ProXS w/a Sportmaster Gearcase with no transducer s on the skid plainer (sp?)
50 lb battery in left rear compartment
40 lbs of batteries in center area in front of the cooler (i use to have led acids at 112 lbs (24 volt system)
35lbs of tackle to the left of the batteries up front
20 lbs of rods in right front rod locker
48 lb XI5 troller
No propoles...
I guess the real question here is what should the weight distribution be optimally in an XB21? I would assume that there is some type of schematic that shows the "optimal weight per section setup" although I would think that each boat is a little different... Any ideas?
Is there a standard protocol that you guys use ie... if with a passenger do this... If just a driver only do this, Light load do this? Heavy do this? Tournament do this?
Thanks Guys!