XTB-21 plus 250 Sport XS = ????

DaveW

Active Member
Joined
Jun 30, 2005
Messages
94
Points
6
Location
Blue Mountains NSW Australia
image.jpeg Hi all,

I'm putting a new 250 SportXS on my XTB-21, and am after any advice I can get. I don't see many with the 3.0l motors on them and am wondering what to expect.
I had an oil pump fail on the old motor, 1700 hours, it had a good life!
Any help appreciated, plus I've added a pic of the old girl done up, it's a wrap, not paint
 

Dark Allison

Active Member
Joined
Sep 8, 2005
Messages
350
Points
18
It will handle a 3L there are 2 of them in Louisiana with 250xs on them.. With the 3L they like a shorter jack plate.
 

scj

Active Member
Joined
Mar 31, 2014
Messages
436
Points
43
Location
Carthage, TN
Paint the trailer green to match the boat and that will be a looker on and off the water!
Once the engine is replaced, you look to have a very nice outfit; top of the line graphs, troller, wrap.......
 

ally25

Active Member
Joined
Oct 3, 2007
Messages
90
Points
8
Location
Central Florida
What motor and set back were you running before? I put a 250xs sport on my 03 a couple yrs ago. I came in from 13.5" to 5.5" to keep the balance the same. I was running a 225 super mag before. I left all batts. and equip. in the same location and the boat floats the same. I did fab. a plate to put between the jackplate and hull to get rid of the backwash from stopping. No more water on the back deck. I wish I had put it on when I had the 225 on it, because it would wash the deck if stopping to quick. If you would like to discuss this in depth, e-mail me at mercury2553@yahoo.comP1060220.JPG P1060223.JPG P1060221.JPG
 
Top