suicidealli
Well-Known Member
i found the boat i want, and going to sell some inventory to make up the extra cash.
i have some used side pin 260 pistons no full sets prolly 20 pistons
i have 2 newer slgihtly used pro marine top pined pistons "single ring"
i have 4 lighten mercury top pined pistons "single ring"
- brucato ACU. i can put 39 lb or 56 lb 260/280/drag curve. 260 36 lb laser/svs curve. 2.4 bp horn curve. 550 shipped. not availible to nov 11th a friend is using it. (SOLD)
- 2 56lb reg A-63 digital box's 475 shipped. not the
- A-7 analog 2.4 bp boz 175 shipped.
260 anaolg horn with a digital barb. has 3 holes in the butterfly. i put a small screw in one hole to block one off. 135.00 shipped (SOLD)
- 260/drag style fuel rail 85.00 shipped (SOLD)
- 2 2.4 bp horn with some of the throttle linkage. 125.00 shipped
2 individual jsre cut heads dont match one is 18789-c3 & 18787-c4 both red in color 80.00 shipped each. they have been milled and radius by jay. both are marked 33 on them. no damge on either head, look great just dont match.
- 225 pm ecu have no idea about limiter. 275 shipped
-wh 29 carbs been sitting around im sure they need needles, and seats, gaskets etc 100 shipped.
-yamaha drag prop 22p stock rubber hub i have never ran it. looks like it could have been repaired at one time. 300 shipped.
- a modified cleaver prop 34p the tips have been rounded to take out some dia. some of the blade surface was removed too. flo torq hub 400 shipped. kinda looks like a yamaha drag.
- 13 3/4 X 23 yamaha drag copy "ron hill" has had a lot of work done to it. runs really good!!!! i think it went 91 with a wore out 260 @ 8800 in 800'.
- 2.4 modified laser injection efi with injectors. i would flow test the injectors they have been sitting. has a 1" spacer welded to the front of it for more air flow when first stomped. the spacer was cut from another laser unit. also the intake has been modified for a 7 pedal. ran better then the horn to 8500 rpm 300.00 shipped.
.75 thin 2.5 head gaskets 65.00 shipped.
any guestions call 513-207-2131 or email rroach@fuse.net
thanks,
roy
i have some used side pin 260 pistons no full sets prolly 20 pistons
i have 2 newer slgihtly used pro marine top pined pistons "single ring"
i have 4 lighten mercury top pined pistons "single ring"
- brucato ACU. i can put 39 lb or 56 lb 260/280/drag curve. 260 36 lb laser/svs curve. 2.4 bp horn curve. 550 shipped. not availible to nov 11th a friend is using it. (SOLD)
- 2 56lb reg A-63 digital box's 475 shipped. not the
- A-7 analog 2.4 bp boz 175 shipped.
260 anaolg horn with a digital barb. has 3 holes in the butterfly. i put a small screw in one hole to block one off. 135.00 shipped (SOLD)
- 260/drag style fuel rail 85.00 shipped (SOLD)
- 2 2.4 bp horn with some of the throttle linkage. 125.00 shipped
2 individual jsre cut heads dont match one is 18789-c3 & 18787-c4 both red in color 80.00 shipped each. they have been milled and radius by jay. both are marked 33 on them. no damge on either head, look great just dont match.
- 225 pm ecu have no idea about limiter. 275 shipped
-wh 29 carbs been sitting around im sure they need needles, and seats, gaskets etc 100 shipped.
-yamaha drag prop 22p stock rubber hub i have never ran it. looks like it could have been repaired at one time. 300 shipped.
- a modified cleaver prop 34p the tips have been rounded to take out some dia. some of the blade surface was removed too. flo torq hub 400 shipped. kinda looks like a yamaha drag.
- 13 3/4 X 23 yamaha drag copy "ron hill" has had a lot of work done to it. runs really good!!!! i think it went 91 with a wore out 260 @ 8800 in 800'.
- 2.4 modified laser injection efi with injectors. i would flow test the injectors they have been sitting. has a 1" spacer welded to the front of it for more air flow when first stomped. the spacer was cut from another laser unit. also the intake has been modified for a 7 pedal. ran better then the horn to 8500 rpm 300.00 shipped.
.75 thin 2.5 head gaskets 65.00 shipped.
any guestions call 513-207-2131 or email rroach@fuse.net
thanks,
roy
Last edited:
